BG-A351019(ADAPTER/DISTILLATION CONNECTING/TOP 10/18/BOTTOM 19/22/SIDE 19/22)
For use as a component in atmospheric or vacuum distillations.

BG-A321420(ADAPTER/VACUUM/OUTER JOINT/14/20/HOSE8mm)
Ideal for use as a vent or for the introduction of pressure/vacuum.

BG-C262280(CONDENSER/REFLUX/180mm/14/20)
Jacket length 180mm,joint 14/20, over height 305mm, hose connection 8mm.

BG-F311450(FLASK/RECOVERY/SINGLE NECK/50mL/14/20)
Heavy wall design. Capacity 50mL. Joint 14/20.

BG-F311950(FLASK/RECOVERY/SINGLE NECK/50mL/19/22)
Heavy wall design. Capacity 50mL. Joint 19/22.

BG-F309500(FLASK/ROUND BOTTOM/SINGLE NECK/500mL/19/22)
Heavy wall design. Capacity 500mL. Joint 19/22.

BG-F301450(FLASK/ROUND BOTTOM/SINGLE NECK/50mL/14/20)
Heavy wall design. Capacity 50mL. Joint 14/20.

BG-A451420(ADAPTER/INLET/14/20)
For use with gas inlet tubes or plain stem thermometers.

BG-A291922(ADAPTER/VACUUM OR ARGON/19/22/8mm)
With hose connection on the side and main joint.

BG-A501922(GROUND JOINT/REDUCED DIAMETER/EXTENDED/DRIP TUBE/19/22/LENGTH BELOW 153mm)
Inner joint with a sealed on lower tube extending 6" below the grind, having the same O.D. tubing on both ends of the grind.

BG-F661410(FLASK/ERLENMEYER/10mL/14/20)
Capacity 10mL.1-Joint 14/20. Stopper is not supplied.

BG-F664000(FLASK/ERLENMEYER/1000mL/24/40)
Capacity 1000mL.1-Joint 24/40. Stopper is not supplied.

AHB-C4160 (Heating Block/Pie Set/4 Pie Wedges & Holder/Dia 160mm)
Heating Block,Pie Set,4 Pie Wedges & Holder,Dia 160mm

BG-A201419(ADAPTER/REDUCING/14/20-19/22)
With joints at top and bottom.

BG-F629125(FUNNEL/PRESSURE EQUALIZING/125mL/19/22)
With 1:5 Teflon stopcock.

BG-F21294L-1(FLASK/ROUND BOTTOM 4-NECK/2000mL/CENTER24/40/SIDE19/22&14/20)
Heavy wall design. Round bottom with identical vertical side joints. Capacity 2000mL.Center joint 24/40,side-1 19/22,side-2 14/20.

BG-F224091-1(FLASK/ROUND BOTTOM/4-NECK/ANGLED/1000mL/CENTER24/40/SIDE19/22&14/20)
Heavy wall design. Round bottom with four joints. Capacity 1000mL.Center joint 24/40,side-1 19/22,side-2 14/20.

AHB-050-2 (Heating Block for Round-Bottom Flask/50mL/Hard Anodize)
Heating Block for 50mL Round-Bottom Flask.

BG-A602424(ADAPTER/ANTI-SPLASH/MODIFIED/UPPER 24/40/LOWER 24/40/100mL)
With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.

BG-A282929(ADAPTER/ANTI-SPLASH/UPPER 29/42/LOWER 29/29/100mL)
This design prevents possible contamination from rotary evaporator.