BG-F304100(FLASK/ROUND BOTTOM/SINGLE NECK/100mL/24/40)
Heavy wall design. Capacity 100mL. Joint 24/40.

BG-F214259-1(FLASK/ROUND BOTTOM 4-NECK/250mL/CENTER24/40/SIDE19/22&14/20)
Heavy wall design. Round bottom with identical vertical side joints. Capacity 250mL.Center joint 24/40,side-1 19/22,side-2 14/20.

BG-F311925(FLASK/RECOVERY/SINGLE NECK/25mL/19/22)
Heavy wall design. Capacity 25mL. Joint 19/22.

BG-F22294L-1(FLASK/ROUND BOTTOM/4-NECK/ANGLED/2000mL/CENTER24/40/SIDE19/22&14/20)
Heavy wall design. Round bottom with four joints. Capacity 2000mL.Center joint 24/40,side-1 19/22,side-2 14/20.

BG-F308100(FLASK/ROUND BOTTOM/SINGLE NECK/100mL/29/42)
Heavy wall design. Capacity 100mL. Joint 29/42.

BG-A522942(ADAPTER/INLET OR THERMOMENTER/29/42)
With a compression cap and Viton O-ring to form a vacuum tight seal. To use it as a syringe port, simply replace the O-ring with Teflon-lined septum. Cap accommodates 5.0-7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton O-ring.

BG-F431150(FLASK/3-NECKS/ANGLED/50mL/CENTER14/20/SIDE14/20)
Round bottom with 3-joints. Capacity 50mL.Center joint 14/20,side 14/20.

BG-F431125(FLASK/3-NECKS/ANGLED/25mL/CENTER14/20/SIDE14/20)
Round bottom with 3-joints. Capacity 25mL.Center joint 14/20,side 14/20.

BG-F419250(FLASK/TWO NECK/ANGLED/250mL/CENTERT19/22/SIDE19/22)
Heavy wall design. Round bottom with two joints. Capacity 250mL. Center joint 19/22,side joint 19/22.

BG-F621925(FUNNEL/PRESSURE EQUALIZING/25mL/19/22)
With 1:5 Teflon stopcock.

BG-F661950(FLASK/ERLENMEYER/50mL/19/22)
Capacity 50mL.1-Joint 19/22. Stopper is not supplied.

AHB-C4160C6 (Heating Block/Pie Wedges/6 Holes/Depth 31mm/Dia 17mm)
Heating Block，Pie Wedges,6 Holes,Depth 31mm,Dia 17mm

BG-A201924(ADAPTER/REDUCING/19/22-24/40)
With joints at top and bottom.

AHB-U09G-3 (Heating Block for Schlenk reaction tube/Porcelain Anodize/9 Holes/Round-bottom/Depth 35mm/Dia 22.3mm)
Heating Block for Schlenk reaction tube.Porcelain Anodize.9 Holes.Round-bottom.Depth 35mm.Dia 22.3mm

AHB-U09D-2 (Heating Block for Heavy Wall Pressure Vessel/Hard Anodize/9 Holes/Round-bottom/Depth 55mm/Dia 26.3mm)
Heating Block for Heavy Wall Pressure Vessel.Hard Anodize.9 Holes.Round-bottom.Depth 55mm.Dia 26.3mm

BG-A521922(ADAPTER/INLET OR THERMOMENTER/19/22)
With a compression cap and Viton O-ring to form a vacuum tight seal. To use it as a syringe port, simply replace the O-ring with Teflon-lined septum. Cap accommodates 5.0-7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton O-ring.

BG-A452440(ADAPTER/INLET/24/40)
For use with gas inlet tubes or plain stem thermometers.

BG-F191450(FUNNEL/POWDER/FLATTENED SIDE/TOP DIA.50mm/14/20)
Funnels have 60 degrees angled side with a standard taper inner joint.

BG-F414100(FLASK/TWO NECK/ANGLED/100mL/CENTERT24/40/SIDE14/20)
Heavy wall design. Round bottom with two joints. Capacity 100mL. Center joint 24/40,side joint 14/20.

BG-A251914(ADAPTER/ENLARGING/19/22-14/20)
With joints at top and bottom.