BG-A851922(ADAPTER/DRYING TUBE/U-shaped/19/22)
With joint 19/22.

BG-F43401L(FLASK/3-NECKS/ANGLED/1000mL/CENTER24/40/SIDE24/40)
Round bottom with 3-joints. Capacity 1000mL.Center joint 24/40,side 24/40.

BG-F309100(FLASK/ROUND BOTTOM/SINGLE NECK/100mL/19/22)
Heavy wall design. Capacity 100mL. Joint 19/22.

AHB-1000-3 (Heating Block for Round-Bottom Flask/1000mL/Porcelain Anodize)
Heating Block for 1000mL Round-Bottom Flask.

BG-A604250(ADAPTER/ANTI-SPLASH/MODIFIED/UPPER 24/40/LOWER 24/40/250mL)
With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.

BG-A282419(ADAPTER/ANTI-SPLASH/UPPER 24/40/LOWER 19/22/100mL)
This design prevents possible contamination from rotary evaporator.

BG-A431922(ADAPTER/INLET WITH HOSE CONNECTION/19/22-8mm)
With vacuum take-off and drip tip.

BG-F224591-1(FLASK/ROUND BOTTOM/4-NECK/ANGLED/500mL/CENTER24/40/SIDE19/22&14/20)
Heavy wall design. Round bottom with four joints. Capacity 500mL.Center joint 24/40,side-1 19/22,side-2 14/20.

BG-F314000(FLASK/RECOVERY/SINGLE NECK/1000mL/24/40)
Heavy wall design. Capacity 1000mL. Joint 24/40.

BG-A852440(ADAPTER/DRYING TUBE/U-shaped/24/40)
With joint 24/40.

NMRTS-5(NMR Tube Micro Spoon/5 spoons)
NMR tube micro spoon(double-headed).

AHB-P1000 (Heating Block Thermo Cover/Hot Proof/Heat Insulation)
Heating Block Thermo Cover,Hot Proof,Heat Insulation.

AHB-13A-2 (Heating Block for Cylindrical Vial/Hard Anodize/13 Holes/Depth 18mm/Dia 13.2mm)
Heating Block for 2mL Cylindrical Vial.Hard Anodize.13 Holes.Depth 18mm.Dia 13.2mm

AHB-100-3 (Heating Block for Round-Bottom Flask/100mL/Porcelain Anodize)
Heating Block for 100mL Round-Bottom Flask.

BG-A871922(ADAPTER/DRYING TUBE/ANGEL 75/19/22)
Angled at 75 degree to avoid desiccant contact with reactions. With joint 19/22.

MMCRYST(Molecular Model Crystal Set)
MMCRYST contains 4 kinds elements of variety of the hybrid.And it can be easily spliced into some reasonable 3-D molecular structure.

AHB-U09M-1 (Heating Block for Heavy Wall Pressure Vessel/Color Anodize/9 Holes/Round-bottom/Depth 55mm/Dia 28.3mm)
Heating Block for Heavy Wall Pressure Vessel.Color Anodize.9 Holes.Round-bottom.Depth 55mm.Dia 28.3mm

BG-F411100(FLASK/TWO NECK/ANGLED/100mL/CENTERT14/20/SIDE14/20)
Heavy wall design. Round bottom with two joints. Capacity 100mL. Center joint 14/20,side joint 14/20.

BG-F181950(FUNNEL/POWDER/TOP DIA.50mm/19/22)
Funnels have 60 degrees side angle and a standard taper inner joint.

BG-A871420(ADAPTER/DRYING TUBE/ANGEL 75/14/20)
Angled at 75 degree to avoid desiccant contact with reactions. With joint 14/20.