BG-C264225(CONDENSER/REFLUX/225mm/24/40)
Jacket length 225mm,joint 24/40, over height 465mm, hose connection 10mm.

BG-F312425(FLASK/RECOVERY/SINGLE NECK/25mL/24/40)
Heavy wall design. Capacity 25mL. Joint 24/40.

BG-A502440(GROUND JOINT/REDUCED DIAMETER/EXTENDED/DRIP TUBE/24/40/LENGTH BELOW 153mm)
Inner joint with a sealed on lower tube extending 6" below the grind, having the same O.D. tubing on both ends of the grind.

BG-F181950(FUNNEL/POWDER/TOP DIA.50mm/19/22)
Funnels have 60 degrees side angle and a standard taper inner joint.

BG-F31291L(FLASK/RECOVERY/SINGLE NECK/1000mL/29/42)
Heavy wall design. Capacity 1000mL. Joint 29/42.

BG-A922440(ADAPTER/VACUUM/INERT GAS 90 DEGREE/24/40)
With 8mm hose connection.

BG-F302450(FLASK/ROUND BOTTOM/SINGLE NECK/50mL/24/40)
Heavy wall design. Capacity 50mL. Joint 24/40.

AHB-2000-1 (Heating Block for Round-Bottom Flask/2000mL/Color Anodize)
Heating Block for 2000mL Round-Bottom Flask.

AHB-U09M-2 (Heating Block for Heavy Wall Pressure Vessel/Hard Anodize/9 Holes/Round-bottom/Depth 55mm/Dia 28.3mm)
Heating Block for Heavy Wall Pressure Vessel.Hard Anodize.9 Holes.Round-bottom.Depth 55mm.Dia 28.3mm

AHB-U09Q-1 (Heating Block for Heavy Wall Pressure Vessel/Color Anodize/9 Holes/Round-bottom/Depth 35mm/Dia 19.9mm)
Heating Block for Heavy Wall Pressure Vessel.Color Anodize.9 Holes.Round-bottom.Depth 35mm.Dia 19.9mm

AHB-U09G-1 (Heating Block for Schlenk reaction tube/Color Anodize/9 Holes/Round-bottom/Depth 35mm/Dia 22.3mm)
Heating Block for Schlenk reaction tube.Color Anodize.9 Holes.Round-bottom.Depth 35mm.Dia 22.3mm

BG-F901950G(FLASK/MODIFIED SCHLENK TUBE/50mL/19/22/Glass Stopcock)
Capacity 50mL. Joint 19/22. With 2mm Glass stopcock.

BG-A351419(ADAPTER/DISTILLATION CONNECTING/TOP 14/20/BOTTOM 19/22/SIDE 19/22)
For use as a component in atmospheric or vacuum distillations.

BG-F614250(FUNNEL/PRESSURE EQUALIZING/TEFLON METERING STOPCOCK/250mL/24/40)
Capacity is 250mL.

BG-F182450(FUNNEL/POWDER/TOP DIA.50mm/24/40)
Funnels have 60 degrees side angle and a standard taper inner joint.

BG-A851420(ADAPTER/DRYING TUBE/U-shaped/14/20)
With joint 14/20.

BG-F419925(FLASK/TWO NECK/ANGLED/25mL/CENTERT19/22/SIDE19/22)
Heavy wall design. Round bottom with two joints. Capacity 25mL. Center joint 19/22,side joint 19/22.

AHB-U09M-3 (Heating Block for Heavy Wall Pressure Vessel/Porcelain Anodize/9 Holes/Round-bottom/Depth 55mm/Dia 28.3mm)
Heating Block for Heavy Wall Pressure Vessel.Porcelain Anodize.9 Holes.Round-bottom.Depth 55mm.Dia 28.3mm

BG-A602419(ADAPTER/ANTI-SPLASH/MODIFIED/UPPER 24/40/LOWER 19/22/100mL)
With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.

BG-A621420(ADAPTER/VACUUM TAKE-OFF/SHORT STEM/UP 14/20)
With a hose connection and a drip tip.