BG-A252914(ADAPTER/ENLARGING/29/42-14/20)
With joints at top and bottom.

BG-A252419(ADAPTER/ENLARGING/24/40-19/22)
With joints at top and bottom.

BG-A201924(ADAPTER/REDUCING/19/22-24/40)
With joints at top and bottom.

BG-F304250(FLASK/ROUND BOTTOM/SINGLE NECK/250mL/24/40)
Heavy wall design. Capacity 250mL. Joint 24/40.

BG-A252414(ADAPTER/ENLARGING/24/40-14/20)
With joints at top and bottom.

PIDA (CAS:3240-34-4/10g)
10g, (Diacetoxyiodio) benzene. CAS: 3240-34-4.
RMW: 322.0985. Decomp. Temp.: 160℃. Insoluble in water

Koser reagent (HTIB)(CAS:27126-76-7/5g)
5g, [Hydroxy(4-methylphenylsulfonyloxy)]benzene. CAS: 27126-76-7.
RMW: 392.2075. Decomp. Temp.: 134-136℃. Soluble in water

BG-A151922(ADAPTER/BENT/ANGEL 75/19/22)
Angled at 75 degree with inner joints at each end. With joint 19/22.

BG-A871420(ADAPTER/DRYING TUBE/ANGEL 75/14/20)
Angled at 75 degree to avoid desiccant contact with reactions. With joint 14/20.

BG-F309250(FLASK/ROUND BOTTOM/SINGLE NECK/250mL/19/22)
Heavy wall design. Capacity 250mL. Joint 19/22.

BG-A201424(ADAPTER/REDUCING/14/20-24/40)
With joints at top and bottom.

BG-A151420(ADAPTER/BENT/ANGEL 75/14/20)
Angled at 75 degree with inner joints at each end. With joint 14/20.

BG-F314100(FLASK/RECOVERY/SINGLE NECK/100mL/24/40)
Heavy wall design. Capacity 100mL. Joint 24/40.

BG-A251914(ADAPTER/ENLARGING/19/22-14/20)
With joints at top and bottom.

BG-A522440(ADAPTER/INLET OR THERMOMENTER/24/40)
With a compression cap and Viton O-ring to form a vacuum tight seal. To use it as a syringe port, simply replace the O-ring with Teflon-lined septum. Cap accommodates 5.0-7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton O-ring.

BG-A502440(GROUND JOINT/REDUCED DIAMETER/EXTENDED/DRIP TUBE/24/40/LENGTH BELOW 153mm)
Inner joint with a sealed on lower tube extending 6" below the grind, having the same O.D. tubing on both ends of the grind.

BG-A322440(ADAPTER/VACUUM/OUTER JOINT/24/40/HOSE10mm)
Ideal for use as a vent or for the introduction of pressure/vacuum.

BG-F304125(FLASK/ROUND BOTTOM/SINGLE NECK/125mL/24/40)
Heavy wall design. Capacity 125mL. Joint 24/40.

BG-A201419(ADAPTER/REDUCING/14/20-19/22)
With joints at top and bottom.

BG-A521922(ADAPTER/INLET OR THERMOMENTER/19/22)
With a compression cap and Viton O-ring to form a vacuum tight seal. To use it as a syringe port, simply replace the O-ring with Teflon-lined septum. Cap accommodates 5.0-7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton O-ring.