BG-A351419(ADAPTER/DISTILLATION CONNECTING/TOP 14/20/BOTTOM 19/22/SIDE 19/22)
For use as a component in atmospheric or vacuum distillations.

BG-A351014(ADAPTER/DISTILLATION CONNECTING/TOP 10/18/BOTTOM 14/20/SIDE 14/20)
For use as a component in atmospheric or vacuum distillations.

BG-A501420(GROUND JOINT/REDUCED DIAMETER/EXTENDED/DRIP TUBE/14/20/LENGTH BELOW 153mm)
Inner joint with a sealed on lower tube extending 6" below the grind, having the same O.D. tubing on both ends of the grind.

BG-A602914(ADAPTER/ANTI-SPLASH/MODIFIED/UPPER 29/42/LOWER 14/20/100mL)
With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.

BG-A602414(ADAPTER/ANTI-SPLASH/MODIFIED/UPPER 24/40/LOWER 14/20/100mL)
With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask.

BG-A282914(ADAPTER/ANTI-SPLASH/UPPER 29/42/LOWER 14/20/100mL)
This design prevents possible contamination from rotary evaporator.

BG-A281250(ADAPTER/ANTI-SPLASH/UPPER 24/40/LOWER 14/20/250mL)
This design prevents possible contamination from rotary evaporator.

BG-A282414(ADAPTER/ANTI-SPLASH/UPPER 24/40/LOWER 14/20/100mL)
This design prevents possible contamination from rotary evaporator.

BG-A831420(ADAPTER/INLET/HEIGHT 65mm/14/20)
Joint 14/20. Hitght 65 mm.

BG-A791419(ADAPTER/BUSHING/14/20-19/22)
Bushing adapters allow for compact assemblies of dissimilar joints.

BG-A751420(ADAPTER/VACUUM/GLASS STOPCOCK 90 DEGREE/14/20)
Used to regulate the flow of gases or liquids into reaction systems.

BG-A361410(ADAPTER/DISTILLATION/14/20)
With a 10/18 joint on the vertical side tube for a 76mm immersion thermometer.

BG-A621420(ADAPTER/VACUUM TAKE-OFF/SHORT STEM/UP 14/20)
With a hose connection and a drip tip.

BG-A381420(ADAPTER/VACUUM/WITH 1:5 TEFLON STOPCOCK/14/20)
With 8mm O.D. hose connection and 2mm Teflon stopcock.

BG-A521420(ADAPTER/INLET OR THERMOMENTER/14/20)
With a compression cap and Viton O-ring to form a vacuum tight seal. To use it as a syringe port, simply replace the O-ring with Teflon-lined septum. Cap accommodates 5.0-7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton O-ring.

BG-A451420(ADAPTER/INLET/14/20)
For use with gas inlet tubes or plain stem thermometers.

BG-A252914(ADAPTER/ENLARGING/29/42-14/20)
With joints at top and bottom.

BG-A252414(ADAPTER/ENLARGING/24/40-14/20)
With joints at top and bottom.

BG-A251914(ADAPTER/ENLARGING/19/22-14/20)
With joints at top and bottom.

BG-A201419(ADAPTER/REDUCING/14/20-19/22)
With joints at top and bottom.

BG-F621425(FUNNEL/PRESSURE EQUALIZING/25mL/14/20)
With 1:5 Teflon stopcock.

BG-F621410(FUNNEL/PRESSURE EQUALIZING/10mL/14/20)
With 1:5 Teflon stopcock.

BG-F191450(FUNNEL/POWDER/FLATTENED SIDE/TOP DIA.50mm/14/20)
Funnels have 60 degrees angled side with a standard taper inner joint.

BG-A151420(ADAPTER/BENT/ANGEL 75/14/20)
Angled at 75 degree with inner joints at each end. With joint 14/20.

BG-A871420(ADAPTER/DRYING TUBE/ANGEL 75/14/20)
Angled at 75 degree to avoid desiccant contact with reactions. With joint 14/20.