BG-A451420(ADAPTER/INLET/14/20)
For use with gas inlet tubes or plain stem thermometers.

BG-F661405(FLASK/ERLENMEYER/5mL/14/20)
Capacity 5mL.1-Joint 14/20. Stopper is not supplied.

BG-A301420(ADAPTER/VACUUM OR ARGON/NITROGEN/14/20/HOSE8mm)
With hose connection on the top and male joint.

BG-A921420(ADAPTER/VACUUM/INERT GAS 90 DEGREE/14/20)
With 8mm hose connection.

BG-A291420(ADAPTER/VACUUM OR ARGON/14/20/8mm)
With hose connection on the side and main joint.

BG-F661410(FLASK/ERLENMEYER/10mL/14/20)
Capacity 10mL.1-Joint 14/20. Stopper is not supplied.

BG-F661450(FLASK/ERLENMEYER/50mL/14/20)
Capacity 50mL.1-Joint 14/20. Stopper is not supplied.

BG-F301405(FLASK/ROUND BOTTOM/SINGLE NECK/5mL/14/20)
Heavy wall design. Capacity 5mL. Joint 14/20.

BG-F301450(FLASK/ROUND BOTTOM/SINGLE NECK/50mL/14/20)
Heavy wall design. Capacity 50mL. Joint 14/20.

BG-F301425(FLASK/ROUND BOTTOM/SINGLE NECK/25mL/14/20)
Heavy wall design. Capacity 25mL. Joint 14/20.

BG-F301410(FLASK/ROUND BOTTOM/SINGLE NECK/10mL/14/20)
Flask, Round bottom, Single neck, Capacity 10mL, Joint 14/20.

BG-F301100(FLASK/ROUND BOTTOM/SINGLE NECK/100mL/14/20)
Heavy wall design. Capacity 100mL. Joint 14/20.

BG-A501420(GROUND JOINT/REDUCED DIAMETER/EXTENDED/DRIP TUBE/14/20/LENGTH BELOW 153mm)
Inner joint with a sealed on lower tube extending 6" below the grind, having the same O.D. tubing on both ends of the grind.

BG-F311405(FLASK/RECOVERY/SINGLE NECK/5mL/14/20)
Heavy wall design. Capacity 5mL. Joint 14/20.

BG-F311410(FLASK/RECOVERY/SINGLE NECK/10mL/14/20)
Heavy wall design. Capacity 10mL. Joint 14/20.

BG-F311425(FLASK/RECOVERY/SINGLE NECK/25mL/14/20)
Heavy wall design. Capacity 25mL. Joint 14/20.

BG-F311450(FLASK/RECOVERY/SINGLE NECK/50mL/14/20)
Heavy wall design. Capacity 50mL. Joint 14/20.

BG-F311100(FLASK/RECOVERY/SINGLE NECK/100mL/14/20)
Heavy wall design. Capacity 100mL. Joint 14/20.

BG-A321420(ADAPTER/VACUUM/OUTER JOINT/14/20/HOSE8mm)
Ideal for use as a vent or for the introduction of pressure/vacuum.

BG-A521420(ADAPTER/INLET OR THERMOMENTER/14/20)
With a compression cap and Viton O-ring to form a vacuum tight seal. To use it as a syringe port, simply replace the O-ring with Teflon-lined septum. Cap accommodates 5.0-7.5mm O.D. thermometer. Supplied with one Nylon cap and one Viton O-ring.

BG-A201419(ADAPTER/REDUCING/14/20-19/22)
With joints at top and bottom.

BG-A251914(ADAPTER/ENLARGING/19/22-14/20)
With joints at top and bottom.

BG-A201424(ADAPTER/REDUCING/14/20-24/40)
With joints at top and bottom.

BG-A151420(ADAPTER/BENT/ANGEL 75/14/20)
Angled at 75 degree with inner joints at each end. With joint 14/20.

BG-A871420(ADAPTER/DRYING TUBE/ANGEL 75/14/20)
Angled at 75 degree to avoid desiccant contact with reactions. With joint 14/20.